Pair RANGE ROVER L405 L494 REAR Differential pinion nut socket and spanner tool set
These are the tools needed to remove and replace the 12 point pinion bearing nut on the newer style of RANGE ROVER L405 and L494 REAR differentials.
Removing the nut on your diff is not a big problem without this tool, some people just use a hammer & chisel !
But correct tightening must be done in order to set the pinion bearing preload.
This is when the correct size tool is essential.
If the bearing preload is not correct on your diff the bearings will fail prematurely.
These tools are only required for the later style L405 and L494 new style diffs with the slide on propshaft joint that is secured with the large flat sided nut.
1 x Pinion nut spanner
1 x Rear Pinion nut socket
Please Note: The spanner tool is steel colour and not chrome plated like the picture shows.
**Please note: the Range Rover and BMW diff pinion nut spanners are different sizes
You May Also Like...
RANGE ROVER L405 L494 REAR Differential pinion nut socket spanner tool
Pair RANGE ROVER L405 L494 FRONT Differential pinion nut socket and spanner tool set