basket  £0

FORD GEARBOX PARTS

CLASSIC FORD GEARBOX REBUILD PARTS and SPARES


We stock Gearbox rebuild spares, bearings and parts for Ford gearboxes and transmissions from 1960 to 1995.


Specialising in classic Fords such as Capri, Cortina, 2000E, Anglia, Sierra, Granada, Escort, RS2000, RS1800, RS Turbo, Cosworth and other classic Ford gearboxes.


FORD 2000e GEARBOX PARTSFORD 2000e GEARBOX PARTS
Rebuild and repair parts for the Ford 2000e or "Bullet" gearbox with 3 selector rails in the top of the main case. The gearbox is commonly known as the 2000e gearbox but was also fitted to Ford Anglia, Ford Cortina Mk1 and Ford Mk1 Escort Mexico / RS2000.
FORD BC GEARBOX PARTSFORD BC GEARBOX PARTS
Ford BC type transmissions are front wheel drive. First used in the Fiesta as a 4 speed unit the soon after a 5 speed BC version was used in Mk3 and Mk4 Ford Escorts and later Fiestas. The BC gearbox was the predecessor to the IB5 gearbox.
FORD DAGENHAM GEARBOX PARTSFORD DAGENHAM GEARBOX PARTS
New rebuild spares and part for the Ford "Dagenham" type transmission with side change linkage. Fitted to some Ford Zodiac, Zephyr, Mustang and Capri Mk1.
FORD FOCUS MK1 ST170 6 SPEED MANUAL GETRAG 285 GEARBOX PARTSFORD FOCUS MK1 ST170 6 SPEED MANUAL GETRAG 285 GEARBOX PARTS
FORD FOCUS MK1 2.0 PETROL ST170 6 SPEED MANUAL GETRAG 285 GEARBOX PARTSGearbox parts and spares for the Getrag 286 6 speed transmission fitted to Mk1 Ford Focus ST170. Bearings, oil seals, synchro, gears, pinions, crownwheels, selector forks, casings etcParts to fit gearbox numbers:2M5V-7002-BA2M5V-7002-BB2M5V-7002-BC2M5V-7002-BDFORD FINIS NUMBER: 4548973Email for more information.
FORD IB5 GEARBOX PARTSFORD IB5 GEARBOX PARTS
Ford IB5 transmissions are all 5 speed. The are in essence an uprated version of the earlier BC gearbox. Modifications included a heavy duty differential bearing and various improvements to mainshaft bearings. A wide variety of ratios are available to suit small petrols engines and high torque diesels.
FORD MT75 GEARBOX PARTSFORD MT75 GEARBOX PARTS
FORD MTX75 GEARBOX PARTSFORD MTX75 GEARBOX PARTS
FORD MUSTANG 6 SPEED MT82 GEARBOX PARTSFORD MUSTANG 6 SPEED MT82 GEARBOX PARTS
REBUILD PARTS AND SPARES FOR THE FORD MUSTANG 6 SPEED GETRAG MT82 GEARBOX.Repair your Ford Mustang 6 speed MT82 transmission using our range of rebuild parts including new Getrag gears, synchro rings, bearings, synchro hubs, casings, oil seals, selector forks and shafts.
FORD T5 COSWORTH GEARBOX PARTSFORD T5 COSWORTH GEARBOX PARTS
Bearings. gaskets, oil seals and other parts for the Borg Warner Tremec T5 gearbox as fitted to Ford Sierra Cosworth, TVR and many other cars.
FORD TRANSIT J2 GEARBOX PARTSFORD TRANSIT J2 GEARBOX PARTS
Repair kits and spare parts to rebuild the Ford Transit 4 speed J2 type gearbox, including manual and Laycock/ Ford overdrive types. The Ford J2 type transmission is 4 speed with a heavy iron case and was fitted to Transits with Essex V6, some 2.0 pinto and York type diesel engines. The tail housing can have a top rubber mounting or bottom stander Ford V shape mounting depending upon vehicle application and year of manufacture. Early versions of the J2 gearbox can also be found with a rear flange that the props haft bolts to.
FORD TYPE 2 GEARBOX PARTSFORD TYPE 2 GEARBOX PARTS
The Ford Type 2 gearbox is normally found in Mk1 & Mk2 Ford Escorts, but there are a few other Fords that use this transmission. The Type 2 has a one piece bell housing and main case, the bell housing cannot be removed. The rear tail housing is aluminium with a screw in gearstick.
FORD TYPE 3 GEARBOX PARTSFORD TYPE 3 GEARBOX PARTS
Transmission repair spares for the Ford Type 3 gearbox fitted to Mk2 / Mk3/ Mk4 / Mk5 Cortina 1.3 and 1.6. Also used in some Ford Capri 1.6 and various Kit Cars etc. This gearbox has one selector shaft rail, an aluminium tail case and removable bellhousing. The Type 3 four speed is in essence a single selector rail version of the later 2000E gearbox with circlip type mainshaft. Also known as "Typ C" in Europe. Found fitted to: Cortina Mk2 Cortina Mk3 1.3/1.6 Cortina Mk4/5 1.3/1.6 Lotus Cortina 69- Capri Mk2/3 1.6 OHC Sierra 1600cc
FORD TYPE 5 GEARBOX PARTSFORD TYPE 5 GEARBOX PARTS
Ford Type 5 gearboxes are a large heavy all iron case 4 speed gearbox. The Type 5 was used in Ford Capris with 3.0 V6 Essex engines and 2.8 4 speed Cologne V6 engines, also found in Reliant Scimitars and a few TVR.Common problems include worn synchro rings, noisy bearings and broken input shaft teeth.Also known as "Typ E" in Europe.
FORD TYPE 9 GEARBOX PARTSFORD TYPE 9 GEARBOX PARTS
Here you will find probably widest range of Ford Type 9 gearbox parts & spares in the world. Introduced in 1982 the Ford Type 9 gearbox is still popular today as the first choice of many sportscar drivers. Used originally in the Ford Sierra and Granada it was then fitted to the Ford Transit, Capri and even P100. There are a few types of input shaft and tailhousing but basic construction remains similar throughout the different models. The Xr4x4 version has a transfer unit to take drive to the front wheels. Parts list link
FORD TYPE E GEARBOX PARTSFORD TYPE E GEARBOX PARTS
The Ford Type E transmission is a 4 speed single selector rail gearbox, used for higher horse powered engines. It came with removable bellhousing in most UK versions and built in integral bellhousing in some Taunus versions. The Ford Type E gearbox is regularly referred to as the "Rocket" box. "Rocket" was the name of the Ford motorsport close-ratio competition gearbox that was based on the Type E. Also known as "Typ B" in Europe. Fitted in: Capri 1.6/2.0 1982> Cortina Mk3 2.0 Cortina Mk4/5 2.0/2.3 Escort RS2000 Mk1/2 Escort RS Mexico Mk2 Sierra 2.0 4 speed.
FORD TYPE H GEARBOX PARTSFORD TYPE H GEARBOX PARTS
This is the Ford Type H gearbox rebuild parts section. The Type H has a selector housing that bolts on the side of the main case, it was fitted to Ford Capri 2.3, 2.0 and some 1.6 OHCThis gearbox was also used in some German Transit 1600cc and 2000cc petrol OHC Pinto engine vans
No products found!